ATL Saver Cells ohne Deckplatten

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungen:Länge: 330mm Breite: 330mmHöhe: 230mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-0305gal 20L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 330 x 330 x 230mmSupplied with:-Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungen:Länge: 330mm Breite: 330mmHöhe: 230mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-0305gal 20L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 330 x 330 x 230mmSupplied with:-Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungen:Länge: 505mm Breite: 305mmHöhe: 224mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-0408gal 30L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 505 x 305 x 224mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungen:Länge: 602mm Breite: 314mmHöhe: 254mmFfIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-05040L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 602 x 314 x 254mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus:Sicherheitstank, SchaumstofffüllungAbmessungen:Länge: 502mm Breite: 437mmHöhe: 234mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-06045L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 502 x 437 x 234mmPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus:Sicherheitstank, Schaumstofffüllung Abmessungen:Länge: 602mm Breite: 437mmHöhe: 234mmFIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-07060L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 602 x 437 x 234mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungenLänge: 620mm Breite: 415mmHöhe: 338mmFIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-09080L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 620 x 415 x 338mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungenLänge: 843mm Breite: 435mmHöhe: 235mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-10080L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 843 x 435 x 235mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungen:Länge: 640mm Breite: 640mmHöhe: 210mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-08080L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 640 x 640 x 210mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungenLänge: 635mm Breite: 430mmHöhe: 430mmFIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-120100L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 635 x 430 x 430mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.

Bestehend aus: Sicherheitstank, SchaumstofffüllungAbmessungenLänge: 740mm Breite: 425mmHöhe: 350mm FIA FT3 Tanks sind Homologationsteile welche extra nach Kundenauftrag bestellt und gekennzeichnet werden!Sie unterliegen daher nicht dem Widerrufs- bzw. Umtauschrecht nach § 312 d Abs. 4 Nr. 1 BGB.Product ID: SA-AA-110100L Saver CellFIA/FT3-1999 approved constructed of a unique, tough plastic alloy (ATL 565)Length x Width x Height = 740 x 425 x 350mmSupplied with:- Internal Saftey Foam BafflingPlease note:To comply with FIA Regulations Saver Cells must be installed within an aluminium container. it is not recommended that customers build their own alloy containers (without consulting ATL) as any sizing issues will invalidate any saver cell warranty.When using Saver Cells with injected engines, always fit either an internal or external fuel collector.All fuel cells experience some swelling when subjected to fuels (usually about 2% to 4 % linear) Please allow 2 weeks for Saver Cell bladder dimensions to stabilise.